5kVA~1500kVA Yhg Brushless Generator for Industry and Household
|FOB Price:||US $300 / Piece|
|Min. Order:||100 Pieces|
|Min. Order||FOB Price|
|100 Pieces||US $300/ Piece|
|Production Capacity:||500 units/month|
|Transport Package:||Plywood Package|
|Payment Terms:||L/C, T/T, D/P, Paypal, Money Gram, Western Union|
- Model NO.: 5KVA-1500KVA
- Installation Method: Fixed
- Cooling Method: Water Cooling
- Speed: Speed
- Usage: Common Units
- Excitation Mode: AC Rotating Exciter
- Frequency: 50Hz or 60Hz
- Generator: Victory, Stamford, Leroy Somer
- Cooling System: 50 Centigrade Radiator
- Voltage: AVR, 110V to 480V Are Available
- Warranty: 1 Year or 1000 Hours, Earlier Time.
- Specification: CE, SONCAP, CIQ, ISO
- HS Code: 85021100
- Type: Micro-Computer Control Automatic Diesel Generator
- Stroke: Four Stroke
- Output Type: AC Three Phase
- Conditions of Use: Land Use
- Landuse Type of Unit: Low Noise Automation Type
- Breaker: MCCB Breaker
- Fuel: Diesel
- Governor Type: Electronic Type or Mechnical Type
- Control Module: Deepsea, Smartgen, Datacom, Comaq
- Engine: Victory, Stamford, Leroy Somer
- Trademark: Victory Power Reliability
- Origin: China
Alternator MECHANICAL FEATURES:
The frame is made by steel plate. All industrial standard generators is IP21(NEMA1), also IP23 is an option. But rated power will decrease 5%.
SHAFT AND KEY:
All generator rotors are dynamically balanced to better than BS6861: Part1 Grade2.5 for minimum vibration in operation. Two bearing generators are balanced with a half key.
TERMINALS AND TERMINAL BOX:
Standard generators are 3-phase reconnect able with 12 ends brought out to the terminals, which are mounted on a cover at the non-drive end of the generator. A sheet steel terminal box contains the AVR and provides ample space for the customers' wiring and gland arrangements. It has removable panels for easy access.
ENGINE ADAPTOR AND COUPLING:
All generators have two kinds construction. The single-bearing generators engine adaptor to SAE 0, 1, 2, 3, 4, and 5, the coupling discs to SAE 7, 5, 8, 10, 11, 5, 14 and 18 are available.
The double-bearing generators adaptor to SAE 0, 1, 2, 3, 4 and 5 are available.
IEC34, CSA C22.2-100, AS1359. Other standards and certifications can be considered on request.
The insulation system is class H.
All wound components are impregnated with materials and processes designed specifically to provide the high build required for static windings and the high mechanical strength required for rotating components.
WINDINGS & ELECTRICAL PERFORMANANCE
All generator stators are wound to 2/3 pitch. This eliminates triple(3rd, 9th, 15th) harmonics on the voltage waveform and is found to be the optimum design for trouble-free supply of non-linear loads. The 2/3 pitch design avoids excessive neutral currents sometimes seen with higher winding pitches, when in parallel with the mains. A fully connected damper winding reduces oscillation during paralleling. This winding, with the 2/3 pitch and carefully selected pole and tooth designs, ensures very low waveform distortion.
SX460, SX440, MX341, and MX321
SX460 AVR STANDARD, VOLTAGE regulation (± 1.5%)
With this self excited control system the main stator supplies power via the Automatic Voltage Regulator (AVR) to the exciter stator. The high efficiency semi-conductors of the AVR ensure positive build-up from initial low levels of residual voltage. The exciter rotor output is fed to the main rotor through a three-phase full wave bridge rectifier. This rectifier is protected by a surge suppressor against surges caused, for example, by short circuit.
SX440 AVR voltage regulation (± 1%), and low frequency protection, exterior voltage adjustment.
MX341 AVR suitable for the generator with Permanent Magnetic Generator(PMG).
|Model||Rated Power (KW/KVA)||Rated Volt.(V)||Rated Curr. (A)||Rated P.F. (Cos Φ )||Rated Speed (r/min)||Steady Volt. Regulation ( %)|